CLOSED CIRCUIT COOLING TOWER MANUFACTURES IN INDIA
Closed Circuit Cooling Tower / Closed Loop Cooling Tower operates during a manner the same as standard cooling towers, except that the smart heat to be rejected is transferred from the method fluid to water and close air directly through a heat exchange coil. The coil serves to isolate the method fluid from outside atmosphere, keeping it clean and contamination free during a control system, so making two separate circuits.
- Primary / Internal circuit in which the process fluid circulates inside the coil
- Secondary / External circuit sprays circulating water from the basin over the coil which evaporates to reject heat to the environment.
Types of cooling coil we used:
Stainless Steel Coil
Carbon Steel Coil
|Model||Cooling Capacity(Kcal/h)||Water Flow(m3/h)|
Above specs are for common use. We can also customize.
Design condition of cooling capacity based on inlet temp 37° C ; Outlet 32° C ; Wet bulb temp 28° C.
Please contact our representative for suitable selection of the equipment based on the site conditions and application.
Advantages of Closed Circuit Cooling Tower
Closed circuit cooling tower is used in the following applications: water source heat pumps, industrial processes, air compressors, weld machine cooling, mould water cooling, power plant auxiliary cooling, furnace cooling, transformer cooling, closed condenser loops, critical systems, and systems requiring plume elimination.
Clean process fluids sustain the performnace of high efficiency components. Save on energy consumption by operating in “Free Cooling Mode” during the winter
Reduces or eliminates cleaning the heat exchanger. Extends the life of the equipment
Free Cooling without an intermediate heat exchanger. Dry operation during winter months. Variable speed pumping to conserve energy without the potential of scaling the unit.
Lower volume of recirculation water reduce water treatment cost. Dry operation and adiabatic modes reduce or eliminate water consumption.
Compact single piece of equipment conserves space replaces three components (cooling tower, heat exchanger, and pump arrangement)
Closed Circuit Cooling Tower Components
Cooling Tower Packing
Cooling tower packing is one of the most important parts of a cooling tower. The packing ensures maximum contact between air and water to enable cooling.
FIL12 | FIL19 | FIL27 | FILOSS19 | ABS | FILRC
Water Distribution System
Engineering, production and installation of open and closed water distribution systems for your cooling tower, including the appropriate nozzles.
CLOSED WATER DISTRIBUTION OPEN WATER DISTRIBUTION NOZZLE
Air Intake Louvers
Air intake louvers prevent water splashes from the water collection tank and prevent larger debris from arriving in the water tank.
Motor and Fans
All parts of a cooling tower are important, but it is certainly important to exercise the necessary care of the drive gear of your cooling tower, these being the turning parts of a cooling tower.
FAN | FAN STACK | MOTOR
Drift eliminators have the purpose of preventing droplets or smaller aerosols from being taken by the air flow from the cooling tower.